Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador descarregar pdf (Página 232)

100

101

Configuring IP, ARP, RARP, RIP, and OSPF Services

6-48

308627-14.20 Rev 00

By default, the metric is set to 0. OSPF uses this value to advertise the smallest

value associated with the routes in the summary route. You can change this

value so that OSPF advertises the route metric that you set. To change the

metric, go to the summary route prompt (for example,

box; ip; ospf; area/0.0.0.1;

summary/0.0.0.1/140.191.0.0

) and enter:

metric

<value>

value

is the metric (expressed as an integer) that OSPF advertises for the route.

Using Site Manager

To configure a summary route, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose OSPF/MOSPF. The OSPF/MOSPF menu opens.

4. Choose Areas. The OSPF Areas window opens.

5. Click on the area for which you want to

define a range.

The parameter values for that area

appear in the OSPF Areas window.

6. Click on Ranges. The OSPF Ranges window opens.

7. Click on Add. The OSPF Range Area window opens.

8. Set the following parameters:

• Range Net

• Range Mask

Click on Help or see the parameter

descriptions beginning on page A-53.

9. Click on OK. You return to the OSPF Ranges window.

(continued)

1 2 ... 227 228 229 230 231 232 233 234 235 236 237 ... 389 390

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Manual do Utilizador Página 232

Comentários a estes Manuais

Manuais e produtos relacionados com Software Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services