Avaya Configuring Dial Services Manual do Utilizador descarregar pdf (Página 111)

Creating Line Pools

4-33

Site Manager returns you to the PRI Logical Lines window.

4. Accept the default MTU size or modify the parameter according to the

parameter description that follows.

Now that you have set the line parameters for the MCT1 or MCE1 lines, they can

become part of a line pool.

Logical Lines Parameter

Use the following description as a guideline when you conﬁgure the MTU Size.

Parameter: MTU Size (bytes)

Default: 1600 bytes

Range: 3 to 4608

Function: Speciﬁes the Transmit/Receive buffer size, which determines the largest

frame that the router can transmit or receive across this port on the MCT1

Link Module. The router discards frames larger than the maximum

transfer unit.

Instructions: Enter the maximum transfer unit.

MIB Object ID: 1.3.6.1.4.1.18.3.4.9.6.1.55

Creating Line Pools with ISDN Interfaces

At this point, the instructions for conﬁguring line pools are the same for BRI and

PRI interfaces. To set up line pools:

1. Select either Dialup➔Demand Pools, Backup Pools, or

Bandwidth-on-demand Pools from the Conﬁguration Manager window.

Site Manager displays a Pools window similar to Figure 4-2 on page 4-4.

2. Click on Add.

Site Manager displays the Pool Conﬁguration window (refer to Figure 4-3).

3. Enter a pool ID, referring to the parameter description on page 4-8, and

click on OK.

Site Manager shows the Lines Deﬁnition window, Figure 4-4 on page 4-5.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 257 258

Sem comentários

Avaya Configuring Dial Services Manual do Utilizador Página 111