Avaya Configuring Routers Manual do Utilizador descarregar pdf (Página 32)

Configuring Routers

1-14

To retrieve a ﬁle from the router for local editing, complete these steps:

a. Select the volume (or slot) containing the conﬁguration ﬁle.

Click on the Volume box to display the available volumes and select a

volume.

The directory of the chosen volume appears in the Directory box.

b. Either type the ﬁlename in the Enter ﬁle name box or click on the

ﬁlename in the Directory box.

c. Click on Open.

The Conﬁguration Manager uses TFTP to retrieve and display the speciﬁed ﬁle in

the Conﬁguration Manager window; the ﬁlename appears in the upper-left corner

of the window. If the ﬁle does not exist, the Conﬁguration Manager window

displays the hardware conﬁguration and no circuits.

In Figure 1-8, the conﬁguration ﬁle contains information for the connectors in

Slots 2, 3, and 4.

Figure 1-8. Router Hardware Conﬁguration in Conﬁguration Manager Window

At this point, you can use the Conﬁguration Manager to perform all desired router

conﬁguration functions (adding interfaces, and so forth). Proceed to Chapter 2 for

more information.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 103 104

Sem comentários

Avaya Configuring Routers Manual do Utilizador Página 32