Avaya Configuring SDLC Services Manual do Utilizador descarregar pdf (Página 61)

Editing SDLC Parameters

114053 Rev. A 4-23

Parameter: REPLYTO Retry Limit

Default: 10

Range: 1 through 64000

Function: Controls the number of times an adjacent secondary link station fails to

respond before the primary link station sends an outage message.

Instructions: Enter a value from 1 through 64000, where 1 causes SDLC to generate an

outage after the ﬁrst REPLYTO Timer expires, and 64000 speciﬁes an

inﬁnite number of retries.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.26

Parameter: Fast Poll Timer

Default: 400 milliseconds

Range: 1 through 64000

Function: Controls the timeout required before reinserting an adjacent secondary

link station into the polling list, after the adjacent secondary station has

been removed for no response. This parameter operates with the Fast Poll

Count Limit parameter.

Instructions: Enter a value from 1 through 64000. Although the timer value is in

milliseconds, you should specify a value so that the timer runs for

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.22

Parameter: Fast Poll Count Limit

Default: 16

Range: 1 through 65535

Function: Controls the number of times a link station is removed from the polling

list on the normal poll timer, before SDLC switches to the Slow Poll

Timer. This parameter operates with the Fast Poll Timer parameter.

Instructions: Enter a value from 1 through 65535, where 1 causes SDLC to switch to

the Slow Poll Timer after the ﬁrst Fast Poll Timer expires, and 65535

speciﬁes an inﬁnite number of retries.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.5.1.23

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 73 74

Sem comentários

Avaya Configuring SDLC Services Manual do Utilizador Página 61