Avaya Configuring SDLC Services Manual do Utilizador descarregar pdf (Página 46)

Configuring SDLC Services

4-8 114053 Rev. A

Parameter: Max Frame Retransmit Count

Default: 5

Range: 1 through 7

Function: Speciﬁes the maximum number of times to retransmit a frame or group of

frames.

Instructions: Enter a value from 1 through 7.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.23

Parameter: Non-productive Timer

Default: 2000 milliseconds

Range: 1 through 65535

Function: Speciﬁes the time allowed for receipt of a valid frame from the primary

link station. This parameter operates with the Non-productive Retry Limit

parameter. It is intended for secondary SDLC routers.

SDLC primarily uses this timer to produce an outage when a secondary

station produces continuous frames without setting the F-bit (Final bit).

In large conﬁgurations with many SDLC connections, you should

increase this value to allow more time for the primary link station to

respond.

Instructions: Enter a value from 1 through 65535.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.12

Parameter: Non-productive Retry Limit

Default: 15

Range: 1 through 65535

Function: Used with the Non-productive Timer parameter to provide the overall

time before SDLC sends an outage message to the device.

Instructions: Enter a value from 1 through 65535, where 1 causes SDLC to generate an

outage after the ﬁrst Non-productive Timer expires, and 65535 speciﬁes

an unlimited retry count.

MIB Object ID: 1.3.6.1.4.1.18.3.5.1.7.2.1.13

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

Sem comentários

Avaya Configuring SDLC Services Manual do Utilizador Página 46