Avaya Configuring PPP Services Manual do Utilizador Página 94

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 118
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 93
Configuring PPP Services
A-16 114068 Rev. A
Parameter:
Max Terminate-Requests
Path: Protocols > PPP > Interfaces > Lines
Default: 2 (packets)
Range: 1 through 100
Function: Specifies the maximum number of unacknowledged Terminate-Request packets
that the router transmits before assuming that the peer router on the other end of
the link is unable to respond. The valid acknowledgment is a Terminate-ACK
packet.
Instructions: Accept the default value of 2.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.11
Parameter: Max Configuration Failure Count
Path: Protocols > PPP > Interfaces > Lines
Default: 10
Range: 1 through 100
Function: Specifies the maximum number of Configure-NAK packets the router sends
before sending a Configure-Reject packet for those options that it does not agree
with.
Instructions: Accept the default value of 10.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.12
Vista de página 93
1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 117 118

Comentários a estes Manuais

Sem comentários