
PPP Parameters
114068 Rev. A A-15
Parameter: Echo-Reply Acceptable Loss
Path: Protocols > PPP > Interfaces > Lines
Default: 3 (packets)
Range: 1 through 100
Function: Specifies the maximum number of unacknowledged Echo-Reply packets that
the router will transmit before declaring the point-to-point link down.
Instructions: Accept the default value of 3.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.9
Parameter: Max Configure-Requests
Path: Protocols > PPP > Interfaces > Lines
Default: 10 (packets)
Range: 1 through 100000
Function: Specifies the maximum number of unacknowledged Configure-Request packets
that the router will transmit before assuming that the peer router on the other
end of the link is unable to respond. The link is then brought down. Valid
acknowledgments include Configure-ACK, Configure-NAK, or
Configure-Reject packets.
Instructions: Accept the default value of 10.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.10
Comentários a estes Manuais