Avaya Configuring PPP Services Manual do Utilizador Página 83

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 118
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 82
PPP Parameters
114068 Rev. A A-5
Parameter: IPX Enable
Path: Protocols > PPP > Interfaces
Default: If you enable Internet Packet Exchange (IPX) support when you configure PPP
on this interface, this parameter is automatically set to Enable. Otherwise, the
default is Disable.
Options: Enable
| Disable
Function: Enables or disables the Network Control Protocol for IPX.
This parameter does not enable or disable IPX routing services for the interface;
it affects the Network Control Protocol for IPX. However, disabling the
Network Control Protocol for IPX stops IPX traffic from being routed over this
interface.
Instructions: To stop IPX traffic from being routed over this interface, set this parameter to
Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.17
Parameter: Bridge Enable
Path: Protocols > PPP > Interfaces
Default: If you enable the bridge when you configure PPP on this interface, this
parameter is automatically set to Enable. Otherwise, the default is Disable.
Options: Enable
| Disable
Function: Enables or disables the Network Control Protocol for the bridge.
This parameter does not enable or disable bridging services for the interface; it
affects the Network Control Protocol for the bridge. However, disabling the
Network Control Protocol for the bridge stops traffic from being bridged over
this interface.
Instructions: To stop traffic from being bridged over this interface, set this parameter to
Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.18
Vista de página 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 117 118

Comentários a estes Manuais

Sem comentários