Avaya Configuring IP Services Manual do Utilizador descarregar pdf (Página 589)

100

101

117356-B Rev. 00

E-1

Appendix E

IP/OSPF Configuration

The IP/OSPF configuration in Figure E-1 shows an AS divided into different

types of OSPF areas using several types of OSPF routers and interfaces as well as

variable-length subnetting. This appendix describes parameter settings for router

1 through router 6. Routers W through Z and A through D are included on the

network map for completion.

In the configuration in Figure E-1

• The OSPF Area Authentication parameter is set to none for all areas.

• All Timer parameter values are left at their defaults (hello, dead, and poll

interval).

• No virtual links are configured.

• Route summarization is not used.

• The frame relay cloud is set to the default management type. It is non-fully

meshed with all group mode PVCs.

• There are three area border routers (router 2, router 3, and router 4), two

internal backbone routers (router 1 and router 5) and one AS boundary router

(router 6 has an Ethernet interface using RIP).

• Router 2 is the designated router for the FDDI segment. Router 4 must be the

designated router for the frame relay cloud.

1 2 ... 584 585 586 587 588 589 590 591 592 593 594 ... 609 610

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Services Manual do Utilizador Página 589

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP Services