Avaya Configuring IP Services Manual do Utilizador descarregar pdf (Página 405)

100

101

Configuring Network Address Translation

117356-B Rev. 00

12-19

Configuring Dynamic Local Address Ranges

Use Site Manager to add, delete, or change the state of dynamic local address

ranges.

Adding a Local Address Range

The local address range is a range of local unregistered source addresses. When

NAT software detects a packet with one of these source addresses on a NAT local

interface, it maps the local address to a registered global address, replaces the

local address with the global address, and sends the packet to its destination

address in another network.

You specify the base address and a prefix (from 0 to 32 decimal) to designate the

range of addresses.

To add a local address range to the NAT Local Address Range List, proceed as

follows:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window, choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

NAT

. The NAT menu opens.

4. Choose

Dynamic

. The Local/Global menu opens.

5. Choose

Local.

The NAT Local Address Range List window

opens.

6. Click on the

ADD

button. The NAT Local Address Range Add window

opens.

7. Enter a local base address.

8. Enter a prefix that designates the address range

(0 to 32 decimal).

9. Click on

. The address range appears in the NAT Local

Address Range List.

1 2 ... 400 401 402 403 404 405 406 407 408 409 410 ... 609 610

Comentários a estes Manuais

Sem comentários

Avaya Configuring IP Services Manual do Utilizador Página 405

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring IP Services