Avaya Configuring DECnet Services Manual do Utilizador descarregar pdf (Página 70)

Configuring DECnet Services

3-32

308619-14.00 Rev 00

Parameter: DECnet 4 to 5 Transition Enable

Default: Enable

Options: Enable

Disable

Function: Enables or disables the DECnet IV to V Transition.

Instructions: To enable the transition, select Enable. To turn this feature off, select

Disable.

After you enable the DECnet IV to V Transition feature, if you select

Protocols > OSI, you will see that the edit and delete options are available.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.12.2

Parameter: Area Address Alias 1 (hex)

Default: None

Options: Any valid area address

Function: Assigns an area address alias to the router. The alias is a different area

address that is assigned to the same router.

For the DECnet IV to V Transition feature, the area address alias defines

the Phase IV prefix and Phase IV area fields of the Phase IV-compatible

address. (Refer to “Translating DECnet Addresses” in Chapter 1.)

Instructions: Enter the area address alias in hexadecimal format.

For the DECnet IV to V Transition feature, enter the Phase IV prefix

(from 1 to 9 bytes), followed by 2 bytes of the Phase IV area address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.6.1.17

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 79 80

Sem comentários

Avaya Configuring DECnet Services Manual do Utilizador Página 70