Avaya Configuring DECnet Services Manual do Utilizador descarregar pdf (Página 54)

Configuring DECnet Services

3-16

308619-14.00 Rev 00

Parameter: Area Routers MAC

Default: None

Options: Frame Relay multicasting address

SMDS group address

Function: Assigns the AllAreaRouters multicast MAC address value to this circuit

for use over frame relay and SMDS WAN connections. This allows you to

specify a destination address for DECnet Level 2 broadcast traffic across

the frame relay or SMDS cloud. This parameter is valid only if this circuit

is a frame relay or SMDS circuit.

Instructions: Enter the multicasting address (frame relay circuits) or group address

(SMDS circuits) that you obtain from your service provider. If you do not

specify a value for this parameter, broadcast traffic will be sent to all

virtual circuits configured on the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.33

Parameter: Node Hello

Default: Enable

Options: Enable

Disable

Function: When disabled, keeps the DECnet router from sending Hello packets to

end nodes. Use this parameter with a static adjacency to limit the amount

of traffic sent over a WAN connection.

Instructions: To limit the amount of traffic traversing the WAN connection between

static adjacencies, set this value to Disable. Otherwise, accept the default

setting.

MIB Object ID: 1.3.6.1.4.1.18.3.5.2.2.1.34

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 79 80

Sem comentários

Avaya Configuring DECnet Services Manual do Utilizador Página 54