Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 23)

Starting SNMP, BootP, and DHCP Services

308644-14.00 Rev 00

1-3

•

module_number

is the net module number (ASN

™

and System 5000

™

routers

only).

•

connector_number

is the number of a connector on the link or net module.

For example, the following command configures an Ethernet interface on slot 1,

connector 2:

box# ethernet slot 1 connector 2

ethernet/1/2#

Step 2: Configuring an IP Interface

To configure an IP interface on a physical interface, navigate to the prompt for the

physical interface and enter:

ip address <

address>

mask <

mask>

address

and

mask

are a valid IP address and its associated subnet mask, expressed

in either dotted-decimal notation or in bit notation.

For example, the following command configures IP interface 2.2.2.2/255.0.0.0 on

an Ethernet physical interface on slot 1, connector 2:

ethernet/1/2# ip address 2.2.2.2 mask 255.0.0.0

ip/2.2.2.2/255.0.0.0#

An IP interface is now configured on the Ethernet interface with default values for

all interface parameters. When you configure an IP interface, the BCC also

configures IP globally on the router with default values for all IP global

parameters.

You can customize IP by modifying IP global and interface parameters as

described in Configuring IP, ARP, RARP, RIP, and OSPF Services.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 173 174

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 23