Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 121)

Customizing BootP/DHCP Relay

308644-14.00 Rev 00

5-3

Defining DHCP Servers

If DHCP clients obtain IP addresses and other configuration information from a

DHCP server on a different subnet, connected through a router, then you must

define a DHCP preferred server by specifying the IP address of the BootP relay

agent on the local router and the IP address of the target server. The router can

then unicast a DHCP packet through normal IP services to that server. For

instructions, see “Specifying Servers for BootP Services” on page 4-14.

To allow DHCP operation, complete the following tasks:

6. Select the address pair that you want to

configure.

7. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-20.

8. Click on

Apply

9. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens.

5. Click on

Pref Serv

. The BOOTP Relay Agent Preferred

Server Table window opens.

6. Set the

Pass Through Mode

parameter.

Click on

Help

or see the parameter

description on page A-23.

(continued)

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 173 174

Comentários a estes Manuais

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 121

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring BOOTP Services