Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 100)

Configuring SNMP, BootP, and DHCP Services

4-2

308644-14.00 Rev 00

Customizing BootP Relay Agent Parameters

After you configure IP interfaces for BootP services, you can configure BootP

relay agent parameters for all of these IP interfaces. The BootP relay agent is

responsible for transmitting BOOTREQUEST packets to servers on the network

and for transmitting BOOTREPLY packets to clients.

Disabling and Reenabling BootP

When you start BootP on an interface, BootP is automatically enabled on that

interface and default values are in effect for all BootP parameters.

To disable or reenable BootP, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you configured for BootP

services on the router.

5. Set the

Enable/Disable

parameter.

Click on

Help

or see the parameter

description on page A-16.

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 173 174

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 100