Avaya Configuring BOOTP Services Manual do Utilizador descarregar pdf (Página 158)

Configuring SNMP, BootP, and DHCP Services

A-24

308644-14.00 Rev 00

DHCP Server Global Parameters

Use the following guidelines to configure DHCP server global parameters in the

DHCP Global Parameters window.

Parameter: Enable

Path: Configuration Manager > Protocols > Global Protocols > DHCP > Global

Default: Enable

Options: Disable

Enable

Function: Specifies whether the DHCP server is enabled or disabled on the router.

Instructions: Select Enable to enable the DHCP server on the router. Select Disable to disable

the DHCP server on the router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.2

Parameter: Server Manager IP Address

Path: Configuration Manager > Protocols > Global Protocols > DHCP > Global

Default: None

Options: Any valid IP address

Function: Specifies the IP address of the NetID Server Manager that provides and

manages DHCP lease information for this DHCP server.

Instructions: Enter the IP address of the NetID DHCP Server Manager.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.3

Parameter: DHCP Server TCP Port Number

Path: Configuration Manager > Protocols > Global Protocols > DHCP > Global

Default: None

Options: A valid TCP port number

Function: Specifies the remote port number over which the DHCP server on the router

communicates with the NetID Server Manager.

Instructions: Enter a remote port number on the DHCP server that matches the port number

for the NetID Server Manager. For information about specifying a remote port

number for the NetID Server Manager, see the NetID System Administrator’s

Guide.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.4

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 173 174

Sem comentários

Avaya Configuring BOOTP Services Manual do Utilizador Página 158