
Configuring ATM Services
A-68 114056 Rev. A
Parameter: Host Encapsulation
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: Ethernet
Options: Ethernet
| SNAP | PDN | DDN | SNAPIP | NULL
Function: Specifies the adjacent host’s encapsulation method.
Instructions: Select Ethernet or SNAP (Subnetwork Access Protocol) if you are defining a
point-to-point network interface, or if the adjacent host resides on an Ethernet.
For an X.25 interface, select Public Data Network (PDN) or Defense Data
Network (DDN). For an adjacent host on an ATM logical IP subnet, select
SNAP. (SNAPIP and NULL also specify host encapsulation methods for ATM
networks.)
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.7
Parameter: Adjacent Host X.121 Address
Path: Configuration Manager > Protocols > IP > Adjacent Hosts
Default: None
Options: Any valid X.121 address
Function: Specifies the X.121 address of the adjacent host.
Instructions: Ignore this parameter. You specify an X.121 address only if this is a PDN/X.25,
DDN/X.25, or Blacker front-end encryption (BFE)/X.25 connection.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.6.1.9
Comentários a estes Manuais