Avaya Configuring ATM Services Manual do Utilizador descarregar pdf (Página 70)

Configuring ATM Services

4-12

Editing PVC Conﬁguration Parameters

To edit PVC conﬁguration parameters, complete the following procedure:

1. From the Conﬁguration Manager window (refer to Figure 4-1), select

Protocols➔ATM DXI➔Interfaces.

The ATM Interface List window opens (refer to Figure 4-2).

2. Select the ATM DXI interface that contains the desired PVC.

3. Click on PVCs.

The ATM DXI PVC List window opens (refer to Figure 4-3).

4. Select the PVC you want to conﬁgure.

5. Assign values to the conﬁguration parameters. Refer to “ATM DXI PVC

List Parameter Descriptions” for guidelines.

6. Click on Apply.

Site Manager saves your changes. If you conﬁgure the PVC to run in direct or

hybrid access mode, the Conﬁguration Manager adds a Protocols menu option

in the top left corner of the ATM DXI PVC List window. The Conﬁguration

Manager then displays a Select Protocols window (Figure 4-5).

Note: If you have just completed the procedure to add or copy a PVC, skip to

Step 4.

Note: If you conﬁgure the PVC to operate in hybrid mode, only Bridge,

Spanning Tree, and Native Mode LAN appear as options in the Select

Protocols window. We strongly recommend that you enable spanning tree on

all hybrid access PVCs to detect loops in the network.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 309 310

Sem comentários

Avaya Configuring ATM Services Manual do Utilizador Página 70