
Editing ATM DXI Parameters
4-7
Parameter: Multicast
Default: Disable
Options: Enable
| Disable
Function: Indicates whether the selected ATM DXI interface supports multicast
packets.
Instructions: Accept the default, Disable, if you do not want the interface to accept
multicast packets. Set to Enable if you want the selected interface to
accept multicast packets.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.2.1.13
Parameter: LMI Enable
Default: Enable
Options: Enable
| Disable
Function: Specifies whether our proprietary version of the Local Management
Interface (LMI) is enabled for the selected interface. This LMI is not
compatible with the ATM Forum standard LMI, and is only for use with
DXI Mode 2 Proprietary.
Instructions: Accept the default, Enable, if you want LMI enabled for the interface. Set
to Disable if you do not want LMI available for the interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.5.2.1.15
Configuring PVCs
You must manually configure all ATM PVCs for each interface. This section
describes how to
• Add or copy PVCs
• Edit PVC configuration parameters
Caution: If you disable LMI, the DSU/CSU cannot report traps to the router
and the router cannot retrieve statistical information from the DSU/CSU.
Comentários a estes Manuais