Avaya B5800 Manual do Utilizador descarregar pdf (Página 87)

External expansion module LEDs

External expansion module

All modules

• Green on = module okay

• Red flashing = module starting up

• Red on = error

Default configuration

Unless you loaded a configuration file onto the System SD card, the B5800 Branch Gateway

system will be configured with default settings when the system is started.

Following are the basic default configuration settings for a B5800 Branch Gateway system.

Network Settings LAN1 LAN2/WAN

IP address 192.168.42.1 192.168.43.1

IP mask 255.255.255.0 255.255.255.0

DHCP mode server server

Number of DHCP IP

addresses

200 200

• Extensions and users — An extension is automatically created for each physical

extension port detected in the system. Extension numbers start from 201 and take the

form Extn201, Extn202, etc. You must manually configure a user for each extension.

Users are not created automatically. Note that there can be extensions on the system that

have not yet had users assigned to them.

• Hunt group — A single hunt group 200 called Main is created and the first 10 users are

placed into that hunt group as members.

• Incoming call routes — Two default incoming call routes are created. Voice calls are

routed to the hunt group Main. Data calls are routed to the RAS user DialIn.

• Default short codes — A-Law or U-Law variant operation is determined by the Feature

Key installed in the control unit. Depending on the variant, different short codes and trunk

settings are added to the default configuration.

• A-Law or Mu-Law — Pulse Code Modulation (PCM) is a method for encoding voice as

data. In telephony, two methods of PCM encoding are widely used, A-law and Mu-law

(also called U-law). Typically Mu-law is used in North America and a few other locations

while A-law is used by the rest of the world. As well as setting the correct PCM encoding

for the region, the A-Law or Mu-Law setting of a B5800 Branch Gateway system when it

is first started affects a wide range of regional defaults relating to line settings and other

Default configuration

Implementing B5800 Branch Gateway for a CS 1000 Configuration October 2012 87

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 323 324

Sem comentários

Avaya B5800 Manual do Utilizador Página 87