Avaya COMPANION Guia de Configuração descarregar pdf (Página 56)

56 Chapter 2 Configuring Companion handsets

P0609345 01

Note: You cannot measure the directed RSSI of both radios in the Base Station at the same

time.

Before you measure directed RSSI, note the following:

— The five-digit ID of the Base Station radio you want to measure, by mapping the Base

Station location to the TCM port. The first four digits indicate the TCM port to which

the Base Station is connected. The last digit indicates the number of the radio on the

Base Station. For example, the number 03142 on the Base Station is connected to

TCM port 0314, and 2 is the radio number. The five-digit number might be printed on

a label attached to the Base Station mounting bracket.

— The radio IDs of all other Base Stations in the same location.

Measuring undirected RSSI for C3060 handsets

1 Press the Menu button.

The display shows MENU.

2 Press the up and down arrow keys until the display shows Feature request.

3 Press SELCT.

The display shows A-.

4 Press * 8 9 8.

The display shows the cell number, the radio ID of the Base Station to which the portable is

linked, the power mode (high or low), followed by the signal strength and the channel. For

example, 8 15112 H 67 29.

Hand-off occurs normally between the cells.

Note: In this example, the cell is 8, the card is 15, the port is 11, the radio is 2, and the channel

is 29. The signal strength measured by the Base Station is -67 dBm, and the H indicates the

portable is transmitting in high-power mode (an L indicates low-power mode)

5 Power off the handset to end the connection.

Measuring directed RSSI for C3060 handsets

1 Follow steps 1 to 5 of “Measuring undirected RSSI for C3060 handsets”.

• If the display shows the ID of a Base Station neighboring the one you want to measure,

proceed to the next step.

• If the display shows the ID of the Base Station you want to measure, move out of the cell

boundary range so that handoff occurs and then continue with the next step.

2 Press the Menu key.

The display shows MENU.

3 Press the up and down arrow keys until the display shows Feature request.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 65 66

Sem comentários

Avaya COMPANION Guia de Configuração Página 56