Avaya COMPANION Guia de Configuração descarregar pdf (Página 21)

Chapter 1 Installing the Companion system 21

Business Communications Manager Companion Configuration Guide

RPI output connections

Feed the output pairs in through the bottom of the RPI and route the pairs to the output connectors.

The following figure shows how to route the output pairs. If you use one pair to power a base

station, connect the power pair to -PWR(1) and +PWR(1). If you use two pairs to power a base

station, connect one pair to -PWR(1) and +PWR(1), and the second pair to -PWR(2) and

+PWR(2).

Figure 7 Output connector pinout

RPI input connections

Feed the TCM input pairs from the Business Communications Manager distribution frame through

the top of the RPI and route them to the input connectors (IBIX1 to IBIX4).

The following figure shows how to route the input pairs. The maximum number of input pairs in

an RPI installation is 16.

Figure 8 Input connector pinout

Caution: Ensure both pairs have the same polarity.

If you connect two power pairs with opposite polarities, you can damage the base station

and RPI.

OBIXn

-PWR(1)

TCM

+PWR(1)

-PWR(2)

+PWR(2)

OBIXn

-PWR(1)

-PWR(2)

TCM

+PWR(1)

+PWR(2)

IBIXn

Pin 3 Pin 1

Pin 2Pin 4Pin 6Pin 8

Pin 5Pin 7

Pin 7

IBIXn

Pin 5 Pin 3 Pin 1

Pin 8Pin 6Pin 4Pin 2

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

Sem comentários

Avaya COMPANION Guia de Configuração Página 21