
Chapter 2 Configuring Companion handsets 43
Business Communications Manager Companion Configuration Guide
Process map: Companion portable handset
Refer to the process map below, which leads you through the order for setting up Companion
handsets on the Business Communications Manager.
Figure 19 Process map: Setting up Companion handsets for registration
BCM is installed and
configured.
Companion DN records
are configured.
Your system must be set to partial double density (PDD). Install a
DSM16 on DS30 Bus 06 and/or 07, or a DSM32 on DS30 Bus 06,
proving both Bus 06 and 07 are available.
Refer to the Business Communications Manager Installation and
Maintenance Guide.
Companion DNs are configured in the Unified Manager under
Services, Telephony Services, System DNs, Inactive DNs, Companion
DNs. Refer to the Programming Operations Guide for configuration
details. Refer also to “Companion DN record parameters” on page 59
for Companion specific information.
Are the
base stations
installed and
connected?
Companion base stations must be mapped and installed to
cover the expected usage area. Refer to “Companion DN
record parameters” on page 59.
Has registration
been enabled?
Have you
set up the
radios in the
base stations?
Perform a reevaluation to register the base station radios to
the system. Then ensure that the cells are correctly configured.
Refer to “Defining radio data” on page 44.
Enable registration and change the registration password, if
required. This opens the channels for the handsets to connect and
register to the system. Refer to “Enabling Companion handset
registration” on page 46.
Register each handset.
Refer to “Registering Companion
portables” on page 48.
To view which DNs are available for registration, refer to DN
headings under Portable DNs. Refer to “Using portable DNs to
show handset status” on page 47
Comentários a estes Manuais