Avaya COMPANION Guia de Configuração descarregar pdf (Página 37)

Chapter 1 Installing the Companion system 37

Business Communications Manager Companion Configuration Guide

Installing an indoor omnidirectional antenna (Canada)

To install an indoor omnidirectional antenna, use the following guidelines:

• Use the bracket supplied to install the antenna on a wall or ceiling. This bracket provides the

necessary clearance between the floor or wall and the antenna.

• Mount the bracket so that the external antenna is vertical. The recommended installation

position on a wall is halfway between the floor and the ceiling.

1 Insert the antenna in the bracket so that the antenna is vertical.

2 Use two screws to install the bracket to the wall or ceiling.

3 To prevent cable stress on the coaxial cable, fasten the cable to the mounting surface

with a clamp.

4 Connect the external antenna to the appropriate base station.

Note: The length of the coaxial cable must not exceed 10 m (33 ft.).

The following figure shows the two methods of installing the indoor omnidirectional external

antenna.

Figure 15 Indoor omnidirectional external antenna (Canada)

30 mm

Ceiling mount

installation

Wall mount

installation

30 mm

Cable

clamp

Cable

clamp

Co-axial

cable

Co-axial

cable

30 mm

Co-axial

cable

Cable

clamp

Ceiling mount installation

Co-axial cable

Cable clamp

Wall mount installation

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 65 66

Sem comentários

Avaya COMPANION Guia de Configuração Página 37