Avaya Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services Manual do Utilizador Página 74

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 148
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 73
Configuring SNMP, RMON, BOOTP, DHCP, and RARP Services
3-6 114070 Rev. B
Configuring a Manager to Receive Traps
After you add a manager to a community, you can configure the manager to
receive traps by specifying its UDP port number and the types of traps the agent
transmits to that manager.
When you configure a manager to receive specific traps or all traps (refer to
T
able 3-1), the router sends this manager all enabled event traps. There is no MIB
correspondence between a specific SNMP manager and a trap entity. Rather, all
SNMP managers that you configure to receive specific traps receive all traps you
have configured.
Specifying the Trap Port
By default, the standard port number on the managing station to which the SNMP
agent transmits traps is 162. To use a different UDP port number, specify a value
from 1 to 9999. Be sure that you do not specify a port that another application
uses.
Specifying a Trap Type
You can specify one of four types of traps that the SNMP agent can transmit to the
manager: Generic, Specific, All, or None.
T
able 3-1 describes these four trap options.
Site Manager: Trap Port parameter: page A-5
Table 3-1. Trap Types Transmitted by the SNMP Agent
Trap Type Description
Generic This is the default trap type. It transmits the well-defined SNMP traps
(cold-start, warm-start, and authentication failure traps) to the manager.
The well-defined, cold-start, and warm-start traps are automatically active
in the SNMP agent; however, you must enable the Authentication Failure
Traps attribute for the agent to transmit such traps to a specified manager.
Specific Allows you to configure the agent software to transmit all enabled log
event traps to a specified manager.
All Allows you to transmit cold-start and warm-start traps, and all enabled log
event traps to a specified manager.
None Prohibits the SNMP agent from transmitting traps to a specified manager.
Vista de página 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 147 148

Comentários a estes Manuais

Sem comentários