Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual do Utilizador descarregar pdf (Página 74)

Configuring SNMP, BootP, DHCP, and RARP Services

3-14

117362-C Rev 00

Configuring a Manager to Receive Traps

After you add a manager to a community, you can configure the manager to

receive traps by specifying its UDP port number and the types of traps the agent

transmits to that manager.

When you configure a manager to receive specific traps or all traps (see

Table 3-2

), the router sends this manager all enabled event traps. There is no MIB

correspondence between a specific SNMP manager and a trap entity. Rather, all

SNMP managers that you configure to receive specific traps receive all traps you

have configured.

Specifying the Trap Port

By default, the standard port number on the managing station to which the SNMP

agent transmits traps is 162. To use a different UDP port number, specify a value

from 1 to 9999. Do not specify a port that another application uses.

6. Choose

Managers

. The SNMP Manager List window for that

community opens.

7. Choose

Manager

. The Manager menu opens.

8. Choose

Add Manager

. The Add SNMP Manager window opens.

9. Enter the IP address of the SNMP

manager you want to add.

10. Click on

. Configuration Manager adds the

manager to the community.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 175 176

Sem comentários

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manual do Utilizador Página 74