Avaya Configuring Frame Relay Services Manual do Utilizador descarregar pdf (Página 60)

Configuring Frame Relay Services

A-10 114058 Rev. A

Parameter: Congestion Control

Path: Conﬁguration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window > PVCs

Default: Inherit

Options: Disable

| Enable | Inherit

Function: Enables or disables congestion control on this interface.

Instructions: Set to Enable to activate congestion control. This value tells the router to drop

all trafﬁc destined for a congested PVC until the congestion clears. Select

Disable to deactivate congestion control. Accept the default, Inherit, if you want

the Congestion Control setting for this PVC to match the setting you specify for

the Frame Relay Interface Congestion Control parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.25

Parameter: Congestion Timer

Path: Conﬁguration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window > PVCs

Default: 1 second

Options: 0.5 through 5 seconds, in 0.5-second intervals

Function: Speciﬁes the length of time during which the router counts congestion

notiﬁcations. If the router receives the number of congestion notiﬁcations set by

the Congestion Counter parameter, the router stops transmitting data. The router

resumes transmission once it stops receiving congestion notiﬁcations.

Instructions: Set the length of time the router should count congestion notiﬁcations from the

network. If you set this parameter for a long time period, the router may be less

likely to stop transmission for an intermittent congestion condition. However,

the router may be slow to detect congestion, resulting in long transmission

delays once the congestion has cleared.

If you set the Congestion Control parameter to Inherit, the PVC uses DLCMI

for congestion control, not the value of this parameter.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.27

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68

Sem comentários

Avaya Configuring Frame Relay Services Manual do Utilizador Página 60