Avaya Configuring Frame Relay Services Manual do Utilizador descarregar pdf (Página 58)

Configuring Frame Relay Services

A-8 114058 Rev. A

Service Record Parameters

Parameter: Service Name

Path: Conﬁguration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window

Default: None

Options: Variable length text string

Function: Identiﬁes the service record.

Instructions: Each service record must have a unique name. The value of this parameter is

supplied by your service provider. Change it only if you are certain that the new

name you assign is unique in your network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.5.1.7

Parameter: DLCI Number

Path: Conﬁguration Manager (select a connector) > Edit Connector window > Edit

Circuit > Services > Frame Relay Service List window > Add

Default: None

Options: The Frame Relay switch provider assigns DLCI numbers. These assigned

numbers are valid options.

Valid DLCI numbers vary based on the Frame Relay address length. The DLCI

numbers that the switch provider assigns are generally in the following ranges:

2 byte -- 16 through 1007

3 byte -- 1024 through 6451

4 byte -- 131072 through 8257535

Function: Speciﬁes the PVC identiﬁcation number that the Frame Relay network uses to

direct data. If you are running IP over Frame Relay, the router uses this number

as the MAC address for an adjacent host. Refer to Conﬁguring IP Services for

more information about adjacent hosts.

Instructions: Enter the decimal number that the Frame Relay provider assigns.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.4

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Sem comentários

Avaya Configuring Frame Relay Services Manual do Utilizador Página 58