Avaya Configuring Frame Relay Services Manual do Utilizador Página 23

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 68
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 22
114058 Rev. A 1-1
Chapter 1
Starting Frame Relay
The quickest way to begin using Frame Relay on your network is to enable it with
default values for all interface parameters and a default service record. The
sections that follow describe this procedure.
Preparing a Configuration File
1. Create and save a configuration file that has at least one WAN interface.
2. Retrieve the configuration file in local, remote, or dynamic mode.
3. Specify router hardware if this is a local-mode configuration file.
Starting Frame Relay
To enable Frame Relay:
1. Select a link or net module connector that requires a WAN circuit.
2. Specify Frame Relay as the WAN protocol.
You have enabled Frame Relay. You can now enable the protocols you want to run
on this interface.
Site Manager Path: From the Protocols Window that appears after you
select the link or net module, select Frame Relay. Click on OK.The Select
Protocols window appears.
Vista de página 22
1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Comentários a estes Manuais

Sem comentários