Avaya Configuring XNS Services Manual do Utilizador descarregar pdf (Página 49)

Editing XNS Parameters

4-13

Parameter: Split Horizon Algorithm

Default: Enable

Options: Enable

| Disable

Function: When the interface forwards RIP and SAP updates, it can exclude RIP

and SAP broadcast updates learned on that interface.

Instructions: Select Enable if you previously set this parameter to Disable and now do

not want the router to transmit RIP and SAP updates received from the

interface over that interface.

Select Disable only if you want the router to transmit RIP and SAP

updates it receives from the interface over that interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.30

Editing RIP Interface Parameters

If you enable RIP on an XNS interface, you can edit the RIP parameters of that

interface by accessing the XNS RIP Interfaces window. (The following

instructions describe a RIP-enabled XNS interface as an XNS RIP interface.)

For instructions on how to add an XNS RIP interface to a circuit, refer to

Conﬁguring Routers. To edit the conﬁgurable RIP parameters of an XNS

interface, begin at the Conﬁguration Manager window (refer to Figure 4-1) and

proceed as follows:

1. Select Protocols➔XNS➔RIP Interfaces.

The XNS RIP Interfaces window appears (F

igure 4-4). The window shows at

the upper left a list of all XNS RIP interfaces conﬁgured on the selected

circuit.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 71 72

Sem comentários

Avaya Configuring XNS Services Manual do Utilizador Página 49