Avaya Configuring XNS Services Manual do Utilizador descarregar pdf (Página 33)

3-1

Chapter 3

Enabling XNS Services

This chapter describes how to enable XNS services. It assumes you have read

Conﬁguring Routers and that you have

1. Opened a conﬁguration ﬁle

2. Speciﬁed router hardware if this is a local mode conﬁguration ﬁle

3. Selected the link or net module connector on which you are enabling XNS

When you enable XNS services, you do not have to conﬁgure any XNS

parameters. The Conﬁguration Manager supplies default values for all XNS

parameters. If you want to edit these default values, refer to Chapter 4, “Editing

XNS Parameters.”

Enabling XNS on an Interface

To enable XNS on an interface, complete the following steps:

1. Select XNS from the WAN Protocols menu; this menu appears after you

select a link or net module connector that requires a WAN circuit.

Protocol prioritization is enabled automatically when you select XNS. For

detailed information on protocol prioritization, refer to Conﬁguring Trafﬁc

Filters and Protocol Prioritization.

2. Click on OK to enable default XNS Services.

The Conﬁguration Manager displays the Select Protocols window. Go to the

appropriate protocol-speciﬁc guide for information on enabling the protocols

you want to run on this interface.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 71 72

Sem comentários

Avaya Configuring XNS Services Manual do Utilizador Página 33