Avaya Configuring XNS Services Manual do Utilizador descarregar pdf (Página 44)

Configuring XNS Services

4-8

Parameter: Cost

Default: 0 (for each hop)

Range: 1 to 15

Function: Sets the cost (number of hops) for this interface. This parameter allows

you to conﬁgure the shortest path. The cost is added to routes learned on

this interface through RIP and is speciﬁed in subsequent RIP packets sent

to other interfaces. XNS disposes of the packet when its hop count

surpasses 15.

Instructions: Enter the interface cost value. Standard RIP implementation assigns a

cost of 1. Increasing this value causes the RIP Network Diameter to reach

the upper bound of 15 more quickly.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.7

Parameter: Xsum On

Default: Enable

Options: Enable

| Disable

Function: Performs checksumming and compares the checksum to the number in

the Checksum ﬁeld of each XNS packet. However, XNS does not perform

a checksum on a packet it receives if the value 0xffff is in the Checksum

ﬁeld. If XNS performs a checksum on a packet, and its value does not

match the value in the Checksum ﬁeld, XNS drops the packet.

Instructions: Select Enable if you want XNS to perform checksumming.

Select Disable to bypass checksumming.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.8

Parameter: MAC Address

Default: None (the base host number that you entered when you added XNS to the

circuit overrides the MAC Address parameter)

Options: Any valid MAC address

Function: Speciﬁes the MAC address of this interface.

Instructions: Leave this parameter blank.

MIB Object ID: 1.3.6.1.4.1.18.3.5.10.3.1.10

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 71 72

Sem comentários

Avaya Configuring XNS Services Manual do Utilizador Página 44