Avaya Configuring PPP Services Manual do Utilizador descarregar pdf (Página 89)

Customizing PPP

117360-A Rev. A 3-35

Using the BCC

1. Enable link quality monitoring.

Enabling link quality monitoring on the interface allows all the other link

quality monitoring parameters to function. Navigate to the IP prompt and

enter the following command.

link-quality-protocol

value

none

LINKQR

Enable the peer LQR timer.

To specify whether the remote peer should maintain the LQR timer for the

interface, enter the following command after setting the link quality protocol

to LINKQR.

peer-lqr-timer

value

enable

disable

Set the LQR reporting period.

To specify the LQR reporting period, enter the following command.

lqr-reporting-period

seconds

is an integer in the range 1 through 120.

4. Set the inbound link quality.

To specify the inbound link quality, enter the following command after setting

the link quality protocol to LINKQR.

lqr-percentage-received

percent

is an integer in the range 0 through 100.

Note: A summary example, showing the use of all the BCC link monitoring

commands, follows these syntax descriptions.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 139 140

Sem comentários

Avaya Configuring PPP Services Manual do Utilizador Página 89