Avaya Configuring PPP Services Manual do Utilizador Página 113

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 140
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 112
PPP Parameters
117360-A Rev. A A-15
Parameter: Restart Timer in Seconds
Path: Protocols > PPP > Interfaces > Lines
Default: 3 (seconds)
Range: 1 through 1000
Function: Specifies the number of seconds that the restart timer waits before retransmitting
data.
Instructions: Accept the default value of 3.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.7
Parameter: Seconds between Xmit of Echo-Request
Path: Protocols > PPP > Interfaces > Lines
Default: 0 (seconds)
Range: 0 through 100
Function: Specifies the number of seconds that the router waits between the transmission
of echo-request packets. A value of 0 means that this parameter is turned off.
Instructions: Accept the default value of 0 or enter an integer value in the range 0 through
100.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.8
Parameter: Echo-Reply Acceptable Loss
Path: Protocols > PPP > Interfaces > Lines
Default: 3 (packets)
Range: 1 through 100
Function: Specifies the maximum number of unacknowledged echo-reply packets that the
router will transmit before declaring the point-to-point link down.
Instructions: Accept the default value of 3.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.9
Vista de página 112
1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 139 140

Comentários a estes Manuais

Sem comentários