Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador descarregar pdf (Página 64)

Configuring Ethernet, FDDI, and Token Ring Services

A-8 117020-A Rev. A

Parameter: Connection Policy

Path: Conﬁguration Manager > FDDI Connector > Edit Line > Edit FDDI

Parameters > Expert > SMT Attributes > FDDI SMT Attributes

Default: 0xff65

Options: 0x0 to 0xffff

Function: Speciﬁes the connection policies this line requests at the FDDI station.

The policy descriptor takes the form “rejectX-Y” where X denotes the physical

connection (PC) type of the local port, and Y denotes the PC type of the

neighbor port. X and Y can have the following values:

• A -- Indicates that the port is a dual-attachment station or concentrator that

attaches to the primary IN and the secondary OUT when attaching to the dual

FDDI ring

• B -- Indicates that the port is a dual-attachment station or concentrator that

attaches to the secondary IN and the primary OUT when attaching to the dual

FDDI ring

• S -- Indicates a port in a single-attachment station or concentrator

• M -- Indicates a port in a concentrator that serves as a master to a connected

station or concentrator

Instructions: Specify the status word value that represents the connection policies you want

this line to reject. Start with a value of zero for the status word (all bits set to 0).

For each connection policy you want the node to reject, add to the status word

value the number 2 raised to a power speciﬁed in Table 3-1 (Chapter 3). This is

equivalent to setting a bit to 1 for each policy that you want the node to reject.

MIB Object ID: 1.3.6.1.4.1.18.3.4.4.1.30

Parameter: T_Notify Timeout

Path: Conﬁguration Manager > FDDI Connector > Edit Line > Edit FDDI

Parameters > Expert > SMT Attributes > FDDI SMT Attributes

Default: 22 seconds

Options: 2 to 30 seconds

Function: Speciﬁes the interval between successful iterations of the Neighbor Notiﬁcation

Protocol.

Instructions: Accept the default value of 22 seconds or specify a new value from 2 to 30

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.4.4.1.31

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 81 82

Sem comentários

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador Página 64