Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador descarregar pdf (Página 58)

Configuring Ethernet, FDDI, and Token Ring Services

A-2 117020-A Rev. A

Parameter: BofL Enable

Path: Conﬁguration Manager > XCVR Connector > Edit Line > Edit CSMA/CD

Parameters

Default: Enable

Range: Enable

| Disable

Function: When set to Enable, the router sends BofL polling messages from this system to

all systems on the local network.

Instructions: Set to Enable or Disable. We recommend that you enable BofL.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.7

Parameter: BofL Timeout

Path: Conﬁguration Manager > XCVR Connector > Edit Line > Edit CSMA/CD

Parameters

Default: 5 seconds

Range: 1 to 60 seconds

Function: Speciﬁes the time between transmissions of Breath of Life messages from this

Ethernet interface. Timeout will occur if ﬁve periods elapse without a successful

BofL message transmission. When timeout occurs, the router disables and

reenables the Ethernet interface.

This parameter is valid only if you set BofL Enable to Enable.

Instructions: Accept the default BofL timeout of 5 seconds, or specify a new value up to 60

seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.4.1.1.8

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 81 82

Sem comentários

Avaya Configuring Ethernet, FDDI, and Token Ring Services Manual do Utilizador Página 58