Avaya Configuring BFE Services Manual do Utilizador descarregar pdf (Página 77)

Configuring Network Address Translation

305753-A Rev 00

3-33

Enabling and Disabling NAT on an Interface

When you add NAT to an IP interface, NAT is enabled by default. You can use the

BCC or Site Manager to enable or disable NAT.

Using the BCC

To enable or disable NAT on an interface, navigate to the NAT interface prompt

(for example,

box; ethernet/13/1; ip/1.2.3.4/255.0.0.0; nat

) and enter:

state

<state>

state

is one of the following:

enabled

(default)

disabled

For example, the following command sequence disables NAT on IP interface

1.2.3.4/255.0.0.0 and verifies the change:

ip/1.2.3.4/255.0.0.0#

nat

nat/1.2.3.4#

state disabled

nat/1.2.3.4#

info

type local

state disabled

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 179 180

Sem comentários

Avaya Configuring BFE Services Manual do Utilizador Página 77