Avaya Configuring BFE Services Manual do Utilizador descarregar pdf (Página 42)

Configuring GRE, NAT, RIPSO, and BFE Services

2-18

305753-A Rev 00

Enabling or Disabling a Remote Tunnel End Point

Use the BCC or Site Manager to enable or disable a remote tunnel end point on a

GRE tunnel.

Using the BCC

To enable or disable a remote tunnel end point, navigate to the remote GRE tunnel

interface prompt (for example,

box; tunnels; gre/boston; remote-endpoint/

austin

) and enter:

state

<state>

state

is one of the following:

enabled

(default)

disabled

For example, the following command sequence disables the remote tunnel end

point austin and verifies the change:

remote-endpoint/austin#

state disabled

remote-endpoint/austin#

info

name austin

address 197.1.2.4

logical-ip-address 9.9.9.2

logical-ipx-address 00112255

state disabled

6. Set the following parameters:

• Connection Name

• Remote Physical IP Address

• Remote Logical IP Address

• Remote Logical IPX Address (hex)

Click on

Help

or see the parameter

descriptions beginning on page A-5.

7. Click on

. You return to the GRE Remote

Connections List window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 179 180

Comentários a estes Manuais

Sem comentários

Avaya Configuring BFE Services Manual do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring BFE Services