Avaya Configuring ATM and MPLS Services Manual do Utilizador descarregar pdf (Página 178)

100

101

Configuring ATM and MPLS Services

5-30

117374-C Rev 00

For example, the following command changes the ILMI Get Request retry count

to 6:

ilmi/11/1# get-retry-count 6

ilmi/11/1#

Using Site Manager

To change the ILMI Get Request retry count value, complete the following tasks:

Setting the ILMI Get Next Request Timer

The ILMI Get Next Request timer specifies the amount of time allowed for the

circuit to receive a GET_NEXT_RESPONSE message after sending a

GET_NEXT_REQUEST message. By default, the circuit waits 3 seconds for a

response. However, you can set this timer to a value from 1 to 120 seconds.

Using the BCC

To change the ILMI Get Next Request timer value, navigate to the ILMI prompt

(for example,

box; atm/11/1; signaling/11/1; ilmi/11/1) and enter:

get-next-timer

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM interface (

ATM1

) that you

want to modify.

The Select Connection Type window

opens.

2. Click on

ATM

. The Edit ATM Connector window opens.

3. Click on

Interim Local Management

Interface (ILMI)

The ATM ILMI Signaling Parameters

window opens.

4. Set the

ILMI Get Retry Count

parameter.

Click on

Help

or see the parameter

description on page A-57.

5. Click on

Done

. You return to the Edit ATM Connector

window.

6. Click on

Done

. You return to the Select Connection Type

window.

7. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 173 174 175 176 177 178 179 180 181 182 183 ... 528 529

Comentários a estes Manuais

Sem comentários

Avaya Configuring ATM and MPLS Services Manual do Utilizador Página 178

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring ATM and MPLS Services