Avaya Configuring ATM and MPLS Services Manual do Utilizador descarregar pdf (Página 141)

100

101

Customizing an ATM Interface

117374-C Rev 00

4-15

Using Site Manager

To enable or disable per-VC clipping, complete the following tasks:

Disabling and Reenabling an ATM Interface

By default, the ATM interface is enabled when you create the circuit. However,

you can disable or reenable the interface at any time.

When the interface is enabled, traffic can flow over the interface. When the

interface is disabled, traffic cannot flow over the interface.

Using the BCC

To disable the ATM logical interface, navigate to the ATM interface prompt (for

example,

box; atm/11/1; atm-interface/11/1

) and enter:

state disabled

For example, the following command disables the ATM interface:

atm-interface/11/1#

state disabled

atm-interface/11/1#

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on the ATM link module interface

(

ATM1

) that you want to modify.

The Select Connection Type window

opens.

2. Click on

Line Attributes

. The ATM/ARE Line Driver Attributes

window opens.

3. Set the

Per-VC Clipping

parameter. Click

Help

or see the parameter description

on page A-11.

4. Click on

. You return to the Select Connection Type

window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 528 529

Comentários a estes Manuais

Sem comentários

Avaya Configuring ATM and MPLS Services Manual do Utilizador Página 141

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring ATM and MPLS Services