Avaya Configuring ATM and MPLS Services Manual do Utilizador descarregar pdf (Página 176)

100

101

Configuring ATM and MPLS Services

5-28

117374-C Rev 00

Modifying ILMI Timers and Retry Counters

You can modify the following timers and their associated counters for ILMI:

• ILMI Get Request timer and retry count

• ILMI Get Next Request timer and retry count

• ILMI Set Request timer and retry count

Setting the ILMI Get Request Timer

The ILMI Get Request timer specifies the amount of time allowed for the circuit

to receive a GET_RESPONSE message after sending a GET_REQUEST

message. By default, the circuit waits 3 seconds for a response. However, you can

set this timer to a value from 1 to 120 seconds.

Using the BCC

To change the ILMI Get Request timer value, navigate to the ILMI prompt (for

example,

box; atm/11/1; signaling/11/1; ilmi/11/1

) and enter:

get-timer

integer

is the time value (in seconds) that you want the timer to use.

For example, the following command changes the ILMI Get Request timer to 6

seconds:

ilmi/11/1# get-timer 6

ilmi/11/1#

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 528 529

Comentários a estes Manuais

Sem comentários

Avaya Configuring ATM and MPLS Services Manual do Utilizador Página 176

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Avaya Configuring ATM and MPLS Services