
Editing APPN Parameters
114049 Rev. A 3-17
Parameter: Interface Enable/Disable
Default: Enable
Options: Enable
| Disable
Function: Enables or disables APPN routing on this interface.
Enable -- Initializes the selected APPN interface. You can also use the
Enable setting to initialize an existing APPN interface that you disabled
earlier.
Disable -- Forces the APPN interface into the “down” (inoperative) state.
Instructions: Select Disable to disable APPN routing over this interface.
Select Enable to enable or re-enable APPN routing over this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.2.1.2
Deleting APPN Interfaces
To delete an interface from the APPN Interface List window (refer to Figure 3-4),
select the interface, then click on Delete. The system software deletes the interface
entry from the APPN configuration.
Editing APPN Ports
The APPN Interface List window (refer to Figure 3-4) allows you to enable or
disable APPN ports, add and delete APPN ports on existing interfaces, and edit
advanced port parameters. From the APPN Interface List window,
1. Select Ports.
The APPN Port List window appears (Figure
3-5).
2. Highlight the port you want to modify.
The parameter values associated with that interface appear in the parameters
window and change dynamically with each port that you select.
3. Click on Apply to save your changes.
Comentários a estes Manuais