Avaya BCM50 Guia de Configuração descarregar pdf (Página 20)

AT&T IP Flexible Reach and AT&T IP Flexible Reach with AT&T Business in a Box

Nortel BCM50 Release 3.0 SIP Configuration Guide

*Nortel, Nortel Networks, Nortel (Logo), the Globemark, CS1000 are trademarks of Nortel Networks.

Issue 1.5 Page 20 of 38

Under

Configuration 



 Telephony 



 Dialing Plan 



 Routing

, select the

“Destination Codes” tab to assign a destination code for the IP trunks.

Configure a destination code “9” or to whatever code you want to access for

outside (IP off-net) call that will be presented to the AT&T service for routing. In

this case, when “9” is dialed we wish to push the dialed string to the IP trunk for

routing. See figure below.

Figure 12: Assign Code to Access IP Trunk Routes

Note:

When completing the Technical Questionnaire Section 6.0 Dial Plan

Information and the private dial plan is selected (YES), then please refer to

Appendix ‘A’: Configuring Destination Code with Wildcard

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Sem comentários

Avaya BCM50 Guia de Configuração Página 20