Avaya BCM50 Guia de Configuração descarregar pdf (Página 15)

AT&T IP Flexible Reach and AT&T IP Flexible Reach with AT&T Business in a Box

Nortel BCM50 Release 3.0 SIP Configuration Guide

*Nortel, Nortel Networks, Nortel (Logo), the Globemark, CS1000 are trademarks of Nortel Networks.

Issue 1.5 Page 15 of 38

Figure 4: Available VoIP Trunks

Note: If no active VoIP lines are present, check to see if either SIP or IP Trunks

licenses are installed. If so, try restarting the “feps” service on the BCM50. This

can be done by going to

Administration 



 General 



 Service Manager

and restarting the “feps” service. Also, check under

Configuration 





Resources 



 Application Resources

, and ensure that the SIP (or IP) Trunks

Minimum and Maximum values are set to 0 and MAX, respectively.

Figure 5: Application Resource availability of SIP (or IP) Trunks

Also ensure that there is a number under “Licence” for either trunk entries.

Otherwise, new keycodes/licenses need to be retrieved for the BCM50.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

Sem comentários

Avaya BCM50 Guia de Configuração Página 15