
CS 1000 engineering for MC 3100 37
Table 3
UEXT configuration parameters (cont’d.)
Parame
ter
Description UDP example
CDP example
primary
DN
On key 0; this determines
the user’s published
addresses for both private
electronic switched network
(ESN) and public direct
inward dial (DID).
5335
contributes to an ESN of
3435335 and a DID of
+16139615335
5335
contributes to an ESN of
3435335 and a DID of
+16139615335
target
DN
Extends the user’s
incoming calls to mobile
clients that are accessible
trough the SIP domain
65553435335 888885335
On the NRS-SPS, configure the UE attributes as described in Table 4
"User Endpoint attributes" (page 37).
Table 4
User Endpoint attributes
Parameter Description Example
User name User’s Electronic Switched Network (ESN)
number
3435335
Tandem gateway
endpoint name
Endpoint name.
Do not configure this parameter
L0 DN Based on the user’s directory number (DN).
Cannot match anything in the Coordinated
Dialing Plan or unqualified dialing plan. Can
be the last digit of the Mobility HLOC with the
User’s ESN DN.
53435335
L1 DN prefix not required
Authentication
enabled
Determines if Authentication is required. Authentication on
Authentication
password
The password for authentication
xxxxxxxx
For more information about UEXTs, see Features and Services
Fundamentals – Book 6 of 6 (NN43001-106-B6). For information about
SIP Gateway configuration, see IP Peer Networking Installation and
Commissioning (NN43001-313).
SIP Trunk configuration
You must configure the communication server SIP trunk that receives
MCG 3100 calls, on behalf of mobile client users, to ESN5. You must
configure all associated Virtual trunks to WNK/WNK. The mobile client
requires these settings so that calls to the Public Network display the
Nortel Mobile Communication 3100
Nortel Mobile Communication 3100 Planning and Engineering
NN42030-200 03.04 17 July 2009
Copyright © 2007-2009 Nortel Networks. All Rights Reserved.
.
Comentários a estes Manuais