Avaya R2MFC Guia de Configuração descarregar pdf (Página 22)

22 Chapter 1 Overview

N0027684 01

External link configuration is performed using the DIP switches on the front of the R2MFC MBM

or by using the CLI, which is accessed through a serial port on the faceplate of the R2MFC MBM.

Internal link configuration is performed using Unified Manager. Refer to “Configuring the

R2MFC MBM” on page 41 for information on how to use the configuration tools.

R2MFC MBM faceplate elements

The faceplate of the R2MFC MBM consists of the following elements:

• “System Status LEDs” on page 23

• “Config DIP switches” on page 23

• “RS232 port” on page 24

• “E1 Status LEDs” on page 24

• “Bantam jacks” on page 24

• “BNC and RJ-48 connectors” on page 24

Figure 2 illustrates the placement of these elements.

Figure 2 R2MFC MBM faceplate

120 Ω E1

RJ-48

75 Ω E1 BNC

Bantam

jacks

E1 status

4 LEDS

RJ-45

DIP

switches

MBM status

3 LEDS

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 105 106

Sem comentários

Avaya R2MFC Guia de Configuração Página 22