
Customizing Line Pools
114062 Rev. B 8-21
3.
Click on Edit D Chan.
Site Manager displays the BRI Interface Configuration window (refer to
Figure 8-7).
4. Enter Enable for the X.25 over ISDN-D Channel parameter.
5. Modify the defaults for the TEI Type and TEI Value parameters, if
necessary.
6. Click on OK.
If this is the first BRI line that you are configuring, Site Manager displays the
ISDN Switch Configuration window (similar to the window shown in
Figure
8-11). Accept the defaults and click on OK.
Site Manager then displays the X.25 Packet and Service configuration
windows. You must configure certain parameters in each of these windows.
Refer to Configuring X.25 Services for instructions. Once you exit from the
X.25 windows, you return to the ISDN Dialup window (refer to Figure
8-6).
7. Click on Done.
Disabling X.25 over the D Channel
When you configure X.25 over the D channel, Site Manager automatically enables
the Global X.25 over ISDN-D Channel parameter in the ISDN Configured
Switches window (refer to Figure
8-11). This parameter disables the feature on a
per-slot basis. For routers with only one slot, disabling this parameter removes the
feature from the router altogether.
To disable X.25 over the D channel:
1. Begin at the Configuration Manager window.
2. Select Dialup > Edit Switch Parameters.
Site Manager displays the ISDN Configured Switches window (refer to
Figure 8-11).
Site Manager: X.25 over ISDN-D Channel parameter: page A-24
Site Manager: TEI Type for X.25 over ISDN-D parameter: page A-25
Site Manager: TEI Value for X.25 over ISDN-D parameter: page A-25
Comentários a estes Manuais