Avaya 1200-Series Nota de Aplicação Página 21

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 44
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 20
FS; Reviewed:
SPOC 09/07/2010
Solution & Interoperability Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
21 of 44
11xx12xx-SM
4.
Enter the change off-pbx-telephone station-mapping command and configure the
following as shown in the screen below:
Station Extension – Set the extension of the OPS station as configured above.
Application – Set to OPS.
Phone Number – Enter the number that the SIP telephone will use for registration
and call termination. In the sample configuration, the Phone Number is the same
as the Station Extension.
Trunk Selection – Set to aar.
change off-pbx-telephone station
-
mapping 30043 Page 1 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station Application Dial CC Phone Number Trunk Config Dual
Extension Prefix Selection Set Mode
30043 OPS - 30043 aar 1
5.
If it is desired to support more than three call appearances, then proceed to Page 2 and
enter the desired number for Call Limit. Remember that this number should agree with
the number of call-appr entries in the station form (Step 3).
change off-pbx-telephone station
-
mapping 30043 Page 2 of 3
STATIONS WITH OFF-PBX TELEPHONE INTEGRATION
Station Appl Call Mapping Calls Bridged Location
Extension Name Limit Mode Allowed Calls
30043 OPS 3 both all both
6.
Repeat Steps 1 - 5 as necessary to administer additional OPS stations and associations for
the SIP telephones.
5.11. Routing
Step Description
1.
Enter the change aar analysis n command, where n is the number to be routed; in this
case 300 (matching any extensions starting with 300xx).
On Page 1 of the form configure the following fields as shown in the screen below:
Dialed String – Set to 300.
Total Min/Max – Set to 5
Route Patten - Set to the appropriate route pattern, in this case 60.
Call Type Set to unku.
change aar analysis 3 Page 1 of 2
AAR DIGIT ANALYSIS TABLE
Location: all Percent Full: 0
Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
300 5 5 60 unku n
Vista de página 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 43 44

Comentários a estes Manuais

Sem comentários