Avaya 1200-Series Nota de Aplicação descarregar pdf (Página 18)

FS; Reviewed:

SPOC 09/07/2010

Solution & Interoperability Test Lab Application Notes

18 of 44

11xx12xx-SM

5.10. SIP Stations

This section describes the steps for administering OPS stations in Communication Manager and

associating the OPS station extensions with the telephone numbers of the Avaya 1100-and 1200-

Series IP Deskphones. The configuration is the same for all phones except for the desired

number of call appearances as detailed in Step 3. Note that the corresponding users must be

configured in Session Manager. There are two methods to sequence these steps:

1. Configure the station and off-PBX-station forms for each user in Communication

Manager. Then configure the corresponding user in Session Manager, being sure to

check the “Use Existing Stations” box (see Section 6).

2. Configure the user in Session Manager, being sure to leave the “Use Existing Stations”

box unchecked (see Section 6). Session Manager will automatically generate the

corresponding station and off-PBX-station information in Communication Manager.

Then use the change station command in Communication Manager to add other

configuration data, such as Coverage Path, MWI Served User Type, and additional call

appearances, if needed.

Method 2 was used in the sample configuration. For method 1, perform the following steps for

each user; then follow the steps in Section 6. For method 2, follow the steps in Section 6 first;

then use change station n to modify any station parameters as described below using the station

form in this section as a guide.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 43 44

Sem comentários

Avaya 1200-Series Nota de Aplicação Página 18