
Configuring Traffic Filters and Protocol Prioritization
6-14
308645-15.0 Rev 00
Table 6-2. Using the Edit Filters Window
Task Site Manager Procedure Notes
Add a
criterion
1. Choose Criteria > Add >
criterion
. The Add
Range window opens.
A filter can have only one criterion.
You must specify at least one range for the
filter.
2. Type a range in the Minimum value and
Maximum value fields, then click on
OK
.
Delete a
criterion
1. Select the criterion to delete in the Filter
Information field.
A filter must have a criterion. Specify a
new criterion after deleting one.
2. Click on
Delete
. The Delete Criteria window
opens.
3. Click on
Delete
.
Add a
range
1. Select the criterion in the Filter Information field. You can add up to 100 ranges. If the range
consists of a single value, type the value in
the Minimum value field only. Use the
prefix 0x to specify a hexadecimal number.
Zero is not a valid entry. Selected ranges
appear in the Range Min and Max fields at
the bottom of the Edit Filters window.
2. Click on
Add
. The Add Range window opens.
3. Type a range in the Minimum value and
Maximum value fields, then click on
OK
.
Delete a
range
1. Select the range to delete in the Filter
Information field.
You must specify at least one range for
each criterion.
2. Click on
Delete
. The Delete Range window
opens.
3. Click on
Delete
.
Add an
action
1. Choose Action > Add >
action
. With the exception of the Log action, each
filter has only one action.
Delete
an action
1. Select an action in the Filter Information field. You must specify at least one action in a
filter.
2. Click on
Delete
. The Delete Action window
opens.
3. Click on
Delete
.
Apply the
changes
1. Click on
OK
. The Filters window opens. Be sure you have specified:
• Only one criterion
• Only one action
• 1-100 ranges
2. Click on
Apply
.
Comentários a estes Manuais